Skip to main content
ervice – Τεχνική Υποστήριξη Πυροσβεστικού Εξοπλισμού - Συμβόλαια Συντήρησης

Service & Technical Support Of Fire Protection Equipment – Maintenance Contracts

Fire Extinguishing Pumping Stations & Piping

Is your pumping station ready to operate in case of fire? Probably not. Very often, the proper operation of the fire extinguishing pumping station in case of fire is taken for granted. However, if we omit the timeliness checkup of its proper operation or this checkup is not done by a qualified technician, perhaps, the pump will not work adequately or at all when needed! For this reason, we would like to kindly remind you that the preventive maintenance of the fire extinguishing pumping station saves lives and property.

Aiming always at the immediate and effective service of our customers, we provide technical support services related to the service, preventive maintenance and damage repairs of fire extinguishing pumping stations, at your premises. During our first visit, an evaluation of the condition of the pumping station and its peripherals is made, in order to send you a complete financial and technical report and set up a programme for regular preventive maintenance, in cooperation with you. Moreover, in case there is a serious damage (which cannot be repaired in situ), the pump is transferred to our well-equipped workshop, for the restoration and repair of the damage. Our technicians are at your disposal, all year round, for your convenience. Call us now for a free evaluation of your fire extinguishing pumping station.

Fire Detection Systems

The inspection and maintenance of a Fire Detection System is the cornerstone of fire prevention. A properly maintained system dramatically increases the level of protection in the event of a fire and effectively protects your life and property. The inspection, maintenance and repair of conventional, addressable or Vesda type fire detection systems, is carried out by experienced crews, while, in cooperation with domestic and international manufacturers of fire detection products, we can supply all the required spare parts. Aiming always at the immediate and effective service of our customers, we provide technical support services related to the service, preventive maintenance and damage repairs of fire detection systems, at your premises. During our first visit, an assessment of the operation status of the fire detection system is made, in order to send you a complete financial and technical report and set up a programme for regular preventive maintenance. Our technicians are at your disposal, all year round, for your convenience. Call us now for a free evaluation of your fire detection system.

Aerosol Fire Suppression / Fire Suppression with 3MTM NOVECTM 1230, CO2 HFC-227EA (FM200), Inergen

The annual inspection and maintenance of the Extinguishing System safeguards its proper operation in case of a fire, in the critical areas for your business, thus protecting effectively lives and property.

The extinguishing system consists of two main parts; the detection system and the extinguishing agent.

The inspection, maintenance and repair of the detection systems is carried out by experienced crews, while, in cooperation with domestic and international manufacturers of fire detection products, we can supply all the required spare parts.

The extinguishing system uses products that require an annual inspection (Aerosol and / or extinguishing gases).  Aerosols are maintained according to the maintenance diagram of the manufacturers, such as DSPA by Unimarsafe, FirePro, etc. The bottles with the extinguishing gases are controlled at your premises with modern instruments (Ultrasound Examination), while the bottles that will need Refilling or Hydraulic Testing, are serviced in modern laboratories. The proper service and the extinguishing products used for Refilling are certified by well-established certification bodies like EVETAM, Bureau Veritas, Eurocert etc.

During our first visit, an assessment of the operation status of the extinguishing system is made, in order to send you a complete financial and technical report and set up a programme for regular preventive maintenance. Our technicians are at your disposal, all year round, for your convenience. Call us, now for a free evaluation of your system.

Explosive Gases Detections Systems

The increasing use of gases (LPG or natural gas) in households, in food preparation areas (restaurants and kitchens) and the use of flammable or toxic gases for industrial applications, create the need to detect possible leaks with early detection systems. Of course, after installation, the regular maintenance of these systems play an important role for their proper functioning. A properly maintained system dramatically increases the level of protection in case of leakage and effectively protects your life and property.

The inspection, maintenance and repair of explosive gas detection systems is carried out by experienced crews, while, in cooperation with domestic and international manufacturers of explosive gas detection materials, we can supply all the required spare parts.

Aiming always at the immediate and effective service of our customers, we provide technical support services related to the service, preventive maintenance and damage repairs of your explosive gas detection system at your premises During our first visit, an assessment of the operation status of the system is made, in order to send you a complete financial and technical report and set up a programme for regular preventive maintenance. Our technicians are at your disposal, all year round, for your convenience. Call us, now for a free evaluation of your system.

CO Detections Systems for Indoor Parking Areas

Carbon monoxide (CO) is formed when combustion is incomplete. It is a very dangerous gas as it is invisible and odorless so it is not detectable by the sensory organs of the human body. It’s a lightweight gas, with almost the same density of air (0.97), so it spreads homogeneously in space. CO belongs to the category of chemical gases that cause suffocation. When you breathe CO, you absorb it from the blood and it progressively reduces the ability of the blood to carry oxygen to the tissues. A prolonged stay in an infected environment with high concentrations of CO can be fatal. More specifically, some of its side effects in relation to exposure time are:

  1. Concentration of 50ppm for 8 hours: Maximum permissible exposure limit, no serious side effects.
  2. Concentration 200ppm for 3 hours : Feeling unwell, slight headache.
  3. Concentration 600ppm for 1 hour : Severe headache.
  4. Concentration of 1500ppm for 1 hour : Severe headache, nausea, discomfort.
  5. Concentration 2000ppm for more than 30 minutes: Severe headache, nausea, discomfort, loss of balance.
  6. Concentration of 2500ppm for more than 30 minutes: Unconsciousness.
  7. Concentration of 4000ppm for more than 1 hour: Death.

In Greece, installation of CO detection systems is mandatory, according to MD 40589/2138/04 (Government Gazette 1102/B/20-07-04), in underground parking areas of medium and large size (over 350 square meters) intended for public use.

Of course, after installation, an important role is played by its regular maintenance for its proper functioning. A properly maintained system dramatically increases the level of protection in case of concentration of CO, so that its proper offtake will immediately protect the health and / or life of you and others.

The inspection, maintenance and repair of carbon monoxide detection systems is carried out by experienced crews, while, in cooperation with domestic and international manufacturers of CO detection products, we can supply all the required spare parts. Aiming always at the immediate and effective service of our customers, we provide technical support services related to the service, preventive maintenance and damage repairs of CO detection system at your premises. During our first visit, an assessment of the operation status of the system is made, in order to send you a complete financial and technical report and set up a programme for regular preventive maintenance. Our technicians are at your disposal, all year round, for your convenience. Call us now for a free evaluation of your fire detection system.

Safety Lighting

The sole purpose of emergency lighting is to ease evacuation, usually in cases of power failure. The duration of autonomous operation of emergency lighting must be such as to ensure the safe evacuation of each building in case of emergency. The minimum requirement set by the Greek standards is 90 minutes with the exception of healthcare and social care buildings (hospitals, clinics, health centers, etc.), where a minimum autonomy of 3 hours is required. In most foreign countries such as Germany, England, Arab countries, a minimum autonomy of 3 hours is required. The inspection, maintenance and repair of emergency lighting, which consists of a charging circuit, rechargeable batteries (usually Ni-Cd), a control circuit and an inverter for the operation of the fluorescent lamp (if any), is carried out by experienced crews, while, in cooperation with domestic and international manufacturers of emergency lighting products, we can supply all the required spare parts.  Aiming always at the immediate and effective service of our customers, we provide technical support services related to the service, preventive maintenance and damage repairs of emergency lighting systems. During our first visit, an assessment of the operation status of the system is made, in order to send you a complete financial and technical report and set up a programme for regular preventive maintenance. Our technicians are at your disposal, all year round, for your convenience. Call us now for a free evaluation of your facility.

Spot Fire Suppression for Restaurants with Wet Chemicals or Dry Powder

The annual inspection and maintenance of the Spot Fire Suppression Systems for Restaurants, ensures its proper operation of the system in case of fire ,thus effectively protecting your life and property. The extinguishing system consists of two main parts, the system of early detection and the extinguishing medium, which is usually with Wet Chemical or dry powder.

The inspection, maintenance and repair of Spot Fire Suppression Systems for Restaurants carried out by experienced crews, while, in cooperation with domestic and international manufacturers of Spot Fire Suppression Systems for Restaurants, we can supply all the required spare parts. The systems are maintained according to the instructions and the maintenance diagram of their manufacturers, such as   Mobiak's type "ZEUS", "ACHILLEAS", "PROMETHEUS", etc., while the bottles that will need Refilling or Hydraulic Testing, are serviced in modern laboratories. 

During our first visit, an assessment of the operation status of the system is made, in order to send you a complete financial and technical report and set up a programme for regular preventive maintenance. Our technicians are at your disposal, all year round, for your convenience. Call us now for a free evaluation of your system.

Fire Extinguishing Maintenance Contracts

One of the most important services that we offer, is the maintenance contracts of your firefighting equipment and concern the fire pumping station, the permanent firefighting network of fire nests, sprinklers and tool stations, the fire detection network, the fire extinguishing system with Aerosol and extinguishing gases such as 3M™ Novec™ 1230 Fire Protection Fluid, CO2, explosive gas detection system, monoxide detection system for closed parking areas, spot suppression systems for restaurants, emergency lighting and fire extinguishers. Maintenance contracts are usually of annual duration and during the term of the contract they include the cost of service and regular preventive maintenance of your equipment, according to the instructions and the maintenance diagram of their manufacturers.   We can also adjust your contract, according to the ISO quality system that you follow and your individual needs.

The obvious advantages of maintenance contracts are the following:

  1. Telephone support from specialized technicians.
  2. On-site support within 48 hours for Athens and Thessaloniki and 72 hours for areas more than 200 km away from our company's headquarters.
  3. Discount on the value of any spare parts that may be required.
  4. Discount on the hourly rate for visits beyond those covered by the Maintenance Contract and for repairs to the machine shop.
  5. The well-trained staff of our company in combination with the wide range of spare parts that we have in stock, ensure the fast and effective solution of any problem that may occur.
  6. The service and regular preventive maintenance of your equipment is done according to the instructions and the maintenance diagram of their manufacturers.
  7. You ensure the smooth operation of your equipment in case of fire, in order to extinguish the fire, thus effectively protecting your life and property.

Our first visit to your place for evaluating the status of your firefighting equipment, in order to set up a programme for regular preventive maintenance contract, is free of charge.

Our technicians are at your disposal, all year round, for your convenience.

Form of interest

+30

Σε αυτόν τον ιστότοπο χρησιμοποιούμε cookies προκειμένου να σας παρέχουμε την καλύτερη δυνατή εμπειρία χρήσης της ιστοσελίδας. Τα cookies είναι αρχεία που αποθηκεύονται στο φυλλομετρητή σας και χρησιμοποιούνται για τις βασικές λειτουργίες πλοήγησης αλλά και για την εξατομίκευση της εμπειρίας σας. Εφόσον συνεχίσετε την πλοήγηση στην ιστοσελίδα μας, αποδέχεστε την χρήση cookies.